Passive RC circuit produces gain

Could a simple passive RC network without any transformers, inductors, switches, or non-linear components produce a voltage gain?

Wow the engineering world with your unique design: Design Ideas Submission Guide

Well, it’s not “free energy,” however, yes, and can even use the same value resistor and capacitor in a ladder network shown in Figure 1, although differing values also can be utilized.

Figure 1 Passive RC circuit using resistors and capacitors of the same value in a ladder network.

Of course, this isn’t of much use other than a curiosity, but it’s a fun circuit to build and play around with!

I built one with seven sections (Figure 2) using an R of 10 kΩ and a C of 0.1 µF, then plotted the results.

Figure 2 A seven-section RC ladder network with an R of 10 kΩ and C of 0.1 µF.

The Bode plot can be seen in Figure 3. As you can see, the gain remains around 0 dBv and behaves as a low-pass filter, then slowly rises to a peak of 1.07 dBv at 1 kHz before falling off.

Figure 3 Bode plot of the passive RC circuit showing low-pass filter behavior until a slow rise to a peak of 1.07 dBv at 1 kHz.

This agrees well with the simulation shown in Figure 4.

Figure 4 Circuit simulation of a passive RC circuit that closely matches the Bode plot shown in Figure 3.

If you swap the resistors and capacitors, the circuit behaves like a high-pass filter and produces a higher gain of 1.13 dBv at 26 Hz, as shown in Figure 5, and a simulation in Figure 6.

Figure 5 Bode plot of the passive RC circuit showing high-pass filter behavior.

Figure 6 Circuit simulation of a passive RC circuit that closely matches the Bode plot shown in Figure 5.

As noted by someone, this technique can be employed with an emitter-follower, which has a voltage gain less than unity to create an oscillator. However, that’s for another upcoming Design Idea (DI), which will also include a note on how a single unbiased JFET can produce a +dBv voltage gain!

Anyway, hopefully some folks find this interesting and have some fun!

Michael A Wyatt is a life member with IEEE and has continued to enjoy electronics ever since his childhood. Mike has a long career spanning Honeywell, Northrop Grumman, Insyte/ITT/Exelis/Harris, ViaSat, and retiring (semi) with Wyatt Labs. During his career, he accumulated 32 US Patents and, in the past, published a few EDN Articles, including Best Idea of the Year in 1989.

Related Content

  • RC networks
  • SPICE Course, Part 2: Time Constant Simulation
  • Designing RC active filters with standard-component values
  • A simple software lowpass filter suits embedded-system applications

The post Passive RC circuit produces gain appeared first on EDN.

Mastering Galvanic Isolation in Power Electronics

Galvanic isolation is a cornerstone of safe and robust power electronics design, ensuring that circuits…

Variable‑reluctance sensors: From fundamentals to speed sensing

Variable reluctance (VR) sensors transform mechanical motion into electrical signals by exploiting changes in magnetic…

Access to this page has been denied.

Access to this page has been denied either because we believe you are using…

Bourns Extends PPTC Resettable Fuses

Bourns has introduced new Multifuse polymeric positive temperature coefficient (PPTC) resettable fuse models that extend…